Bender & Wirth
deutsch english

catalog no.

bases

memo

ratings

   

420

LED 420 LED Wire-to-Board-Feeder

The miniature layout of the LED Connector Series 420 from Bender + Wirth ensures shadow-less light and plenty of space for optical components. All elements are potting-compatible.

The feeder 420 have a welded connection between wire and connector which creates a very robust and low resistance connection.

The top-side assembly improves the module temperature management and simplifies maintenance operations.
rated voltage: 50VAC / 120VDC
rated current: 5 A (20°C)
rated temperature: -50°C / +100 C

   

421

LED 421 LED Board-to-Board-Connector

The miniature layout of the LED Connector Series 420 from Bender + Wirth ensures shadow-less light and plenty of space for optical components. All elements are potting-compatible.

Due to the small dimensions, the connectors 421 maintain the catch between the LED´s even with small distances.

The top-side assembly improves the module temperature management and simplifies maintenance operations.
rated voltage: 50VAC / 120VDC
rated current: 5 A (20°C)
rated temperature: -50°C / +100 C


   

423

LED 423 SMD-Pins

The miniature layout of the LED Connector Series 420 from Bender + Wirth ensures shadow-less light and plenty of space for optical components. All elements are potting-compatible.

The short SMD Pins 423 are packed in a blister and spooled on a reel. Therefore, they are suitable for automated SMD installation.

   

424

LED 424 HV-Wire-to-Board-Feeder

The miniature layout of the LED Connector Series 420 from Bender + Wirth ensures shadow-less light and plenty of space for optical components. All elements are potting-compatible.

The feeder 424 have a welded connection between wire and connector which creates a very robust and low resistance connection.

A special designed sleeve protects the sensitive connection area of the feeder 424.

The top-side assembly improves the module temperature management and simplifies maintenance operations.
rated voltage: 250VAC / 450VDC
rated current: 5 A (20°C)
rated temperature: -50°C / +100 C

   

425

LED 425 HV-Board-to-Board-Connector

The miniature layout of the LED Connector Series 420 from Bender + Wirth ensures shadow-less light and plenty of space for optical components. All elements are potting-compatible.

Due to the small dimensions, the connectors 425 maintain the catch between the LED´s even with small distances.

The high voltage version 425 allows a safe connection up to 250V AC / 450V DC (with transient overvoltages up to 4kV).

The top-side assembly improves the module temperature management and simplifies maintenance operations.
rated voltage: 250VAC / 450VDC
rated current: 5 A (20°C)
rated temperature: -50°C / +100°C

   

410

R13 Plastic lampholder

This lampholder was designed for the Philips OLED modules. The feeder is installed at the ends of each OLED series.
rated voltage: 32 V DC
rated current: 1 A
rated temperature: T100
category: II
shock protection: unenclosed

   

411

R13 Plastic Lampholder

This lampholder was designed for the Philips OLED modules. The coupler is installed between the OLEDs of a series.
rated voltage: 32 V DC
rated current: 1 A
rated temperature: T100
category: II
shock protection: unenclosed
insulation: basic insulation

NEWS CATALOGUE COMPANY CONTACT DISCLAIMER IMPRINT PRIVACY STATEMENT