Bender & Wirth
deutsch english

catalog no.

bases

memo

ratings

   

814

G4
GY4
GZ4
GX5.3
G6.35
GY6.35
GZ6.35
Universal lampholder for MR11 / MR16 and G6.35 lamps

This lampholder can be used with almost all common low voltage lamps. The electric connection is made by the patented, wireless contact through the mounting screws.

discontinued

 

rated voltage: 24 V
rated current: 10 A
rated temperature: T350
category: II
shock protection: unenclosed

   

815

G4
GY4
GZ4
GX5.3
G6.35
GY6.35
GZ6.35
Universal lampholder for MR11 / MR16 and G6.35 lamps

This lampholder can be used with almost all common low voltage lamps. One electric connection is made by the patented, wireless contact through the mounting screw, the other contact is made by using a standard wire.

discontinued

 

rated voltage: 24 V
rated current: 10 A
rated temperature: T350
category: II
shock protection: unenclosed

   

994

G4
GY4
GZ4
Standard lampholder

rated voltage: 250 V
rated current: 10 A
rated temperature: T350
category: II
shock protection: unenclosed
insulation: basic insulation

   

958

G4
GY4
GZ4
Lampholder

Lateral wire routing possible.
rated voltage: 250 V
rated current: 10 A
rated temperature: T350
category: II
shock protection: unenclosed
insulation: basic insulation

   

990

G4
GY4
GZ4
Lampholder with side contact

In order to allow a close postitioning of the lamp to the reflector, the contact is located at the edge of the lampholder.
rated voltage: 50 V
rated current: 10 A
rated temperature: T350
category: II
shock protection: unenclosed
insulation: basic insulation

   

971

G4
GY4
GZ4
Lampholder with middle contact

rated voltage: 250 V
rated current: 6 A
rated temperature: T250
category: II
shock protection: unenclosed
insulation: basic insulation

   

973

G4 Miniature lampholder

With recess or slot for clip fixing available.

With lateral wire routing for reduced height available.
rated voltage: 24 V
rated current: 4 A
rated temperature: T180
category: II
shock protection: unenclosed
insulation: basic insulation

   

993

G4 Miniature lampholder with heat sink

With and without heat sink available.

With lateral wire routing for reduced height available.
rated voltage: 24 V
rated current: 4 A
rated temperature: T180
category: II
shock protection: unenclosed
insulation: basic insulation

   

979

GU4 Standard lampholder

Even with high tolerances of the lamp cap, the slotted retention spring provides a safe and secure lamp fit.
rated voltage: 24 V
rated current: 10 A
rated temperature: T350
category: II
shock protection: unenclosed
insulation: basic insulation

   

872

GX5.3 Special lampholder for MR16

One electric connection of the lampholder is made by the patented, wireless contact through the mounting screws, the other contact is made by using a standar wire.

The contacts are calibrated to the thinner pins of the MR16 lamps andprovide a very accurate lamp positioning.
rated voltage: 24 V
rated current: 12.5 A
rated temperature: T350
category: II
shock protection: unenclosed
insulation: basic insulation

NEWS CATALOGUE COMPANY CONTACT DISCLAIMER IMPRINT PRIVACY STATEMENT